What we make
The parts that wear, and
the parts that hold it together
Most of this goes into new machines. An attachment builder or an equipment supplier needs the same part again, made the same way, batch after batch, to go out on a unit they are selling. Repeat orders off a drawing we already hold.
- Pins — plain, domed, stepped, locking, extended, lateral damper
- Bushes — sliding pin bushings, front and rear shaft bushes
- Wear parts — skids, tooth skids, UHMWPE wear strip sets
- Cutter plates for profiling heads
- Excavator hitch components
- Cylinder shafts, made new to sample, threaded and finished
- Axle lugs, in sets
- Toggle arms and links, bored to critical hole pitch
- Sleeves, spacers and adaptors
Size
What we have machined
Sizes we have run, not machine plate figures. Send the drawing and we will tell you straight whether it fits.
- Bar to Ø230mm in 4140 heat treated
- Pins at Ø95/70 × 260mm in 30CrNiMo8
- Shafts to 2,252mm, faced full length with keyway and chamfer
- Bores to Ø80mm, hole pitch held to print
- Plate to 80mm thick
- BIS450 abrasion-resistant plate, in profile and section
Materials
Chosen for the job it has to do
4140 and 4340 heat treated, 1045, 20MnV6, E470, bright and black mild steel. BIS450 for abrasion, G250 plate to 70mm, 304 and 316 stainless, 431 through-hardened. Aluminium bronze, Vesconite and UHMWPE where the part slides.
Our steel comes from merchants who issue mill certificates. Ask for the certificate when you lodge the job and it comes with the part.
No drawing
Send a sample, get new ones
Plenty of this starts without a drawing. Send a sample and we measure it, draw it and make new ones, in whatever quantity you need. The drawing stays yours and the second order is a straight reorder. We do repair and remachining work as well, where a new part is not the sensible answer.
Laser cutting, heat treatment, plating, anodising and gear cutting go to the same suppliers we have used for years. You get a finished part back, and one invoice.
How to get a quote
Everything runs through your own account
Job details, drawings, revisions, quote approval and job tracking all live in one place. Create an account, lodge the job and attach the drawing — you will get a written quote with a real date, and you can watch the job move across the floor without ringing us.
Seaford VIC 3198